ZVA Slimline Nozzle

Approved for retail dispensers the ZVA slimline 2 nozzles are installed at almost every single forecourt throughout the China and into all over the world.

The automatic shut off design ensures that the delivery of fuel is isolated once the fluid level reaches the end face of the spout. Additional features include: Venturi type automatic shut-off with safety cut-out valve. Integral check valve. 2-speed lever latch with removable latch pin, 1" or ¾" aluminium swivelling inlet and multiple guard options.

Meets requirements of EN 13012, ATEX category EX II 1G, all European regulations for weights and measures and SIRA 03ATEX9 487U. TÜV approval P-TÜ7-01930.

Specification

Nozzle	ZVA2 R Slimline	ZVA2 (H)
Type	Automatic shut off
Materials	Aluminium Body
	Stainless Steel, Steel Acetal Resin Internals
	NBR/polyurethane Seals
	PVC Guard, Optional Brass Swivel
Max Flow	55 litre/min	80 litre/min
Spout Diameter	21mm Dia	25mm Dia
Pressure (min)	7.3 PSI (0.5 Bar)
Pressure (max)	50 PSI (3.5 Bar)
Temp Range	-20°C to +55°C
Connection Options	¾" BSP (female) Swivel
	¾" BSP (male) Swivel
	¾" NPT (female) Swivel
	1" BSP (female) Swivel
	1" BSP (male) Swivel
	1" NPT (female) Swivel

Suitable for Petrol, Gasoline (also with ethanol content), diesels, fuel oils and biodiesels.

ZVA nozzles are highly configurable and can be customised to suit specific applications. Various options exist including inlet fitting, guard type and spout pattern. Most installations will call for the standard configuration which is;